Main points of strawberry three-dimensional cultivation management

Variety selection: Choose varieties with shallow dormancy, large single fruit, strong fruiting capacity per plant, good fruit quality, suitable for sightseeing picking, and resistance to frost and disease in spring.

Formulated cultivation substrates The substrates with good application effect in the current production include peat, vermiculite, perlite, sand, sawdust, mushroom residue, straw, coconut bran and so on.

When planting plants, choose strong seedlings for planting. When planting strawberry seedlings, first position them according to the plant spacing, and then use a spatula to insert holes in the soil at the planting site. Soil compaction.

The mulch film is cut according to the size of the plastic bowl, and a corresponding mulch film is cut out and fixed on the plastic bowl with a clip. After clipping, dig a hole in the mulch to remove the strawberry seedlings from the hole.

Temperature and humidity management The temperature of the shed is controlled at 28 ℃ ~ 30 ℃ during the day. When it exceeds 30 ℃, it should be ventilated in time. The temperature at night is controlled at 12 ℃ ~ 15 ℃. Humidity is generally maintained at 40% to 50%, and cannot exceed 80%.

Water and fertilizer management In order to control humidity and reduce disease, water should be drip irrigation. In three-dimensional cultivation, the active area of ​​the plant root system is reduced. The number of top dressing should be appropriately increased, mainly liquid fertilizer.

Flowering management Flowering management can be combined with artificial pollination or bee release to improve fruit setting and reduce the occurrence of deformed fruit. The density of bees in a greenhouse is generally kept at a ratio of one bee to one strawberry.

Disclaimer: Some articles of this website are transferred from the Internet. If the legal rights of third parties are involved, please inform this website for processing. phone

Tof LiDAR Sensor

Tof(Time-of-flight), is JRT new product, which is a single-point LiDAR sensor. With a micro size of 46x17x7mm, customers can widely use in many Laser Measurement Solutions. The lidar distance sensor can measure 12m short-range. It's great for Unmanned Aerial Systems.Contact Us Now for data sheet.

Product Name Tof LiDAR Sensor
Model Number IT02S-65-A/IT02S-65-B/IT03M-650
Measuring Range (without Reflection) 0.1-12m/0.1-10m/0.1-15m(90% reflectivity)
Place of Origin China
Accuracy 2cm~4cm/5cm
Blind Area 10cm
Resolution 1cm
Measuring Unit centimetre
Laser Class Class II, red
Laser Type 650nm, <1mW
Communication Interface UART, 115200bps(default)
Size 46*17*7mm/50*26*13mm
Weight About 4g/10g
Voltage 2.7V~+3.6V
Electrical Level TTL/CMOS
High Frequency 100hz
Operating Temperature 0-40 ℃ (32-104 ℉ )
Storage Temperature -25~60 ℃ (-13~140 ℉)

ToF Sensor,Time of Flight Sensor,LiDAR Distance Sensor,ToF Distance Sensor

Chengdu JRT Meter Technology Co., Ltd , https://www.rangingsensor.com