Kiwifruit grafting in early spring pays attention to five points

Scion should be disinfected and properly preserved. According to technical requirements, 50 scoops of scions collected after winter cutting should be marked and the sand should be trapped in the shade. If the condition is not available, the long scion can be cut into small scions, immersed in the agricultural streptomycin solution before disinfecting, and then the dried water is removed. The wax seal is stored in a refrigerator (cabinet) at 0°C to 5°C and stored in a freezer. .

Strictly grasp the grafting time of kiwifruit spring grafting, whether it is high grafting or grafting of saplings, in order to achieve the goal of high survival rate, should be selected before the sap flow or after the end of the wound period to avoid the tree body flow period. The specific period to be selected is: before germination (ie, from late February to early March, rainfall-convulsions); in order to prevent unfavorable factors such as late spring and late frost from affecting the survival rate of grafting, the best period should be after budding.

Select the appropriate method of grafting kiwifruit trees connected, it is appropriate to use splicing and subcutaneous abdominal connection; sapling grafting method should use the tongue and single bud abdominal connection method. Remember: Buds must be sunny, east, south, and west. It's best to first melt the cut scion and cover it with wax, and then graft. Specific operation points: find a small metal container, cut the candle into several sections and put it into the container, place the container in the water basin, and then put the water basin on the stove or induction cooker to heat and melt, and then put the scion into the wax liquid one by one. The top speed can be clicked.

The correct selection of grafting sites in the past had been poorly grafted for resistance to frost and disease resistance. Therefore, it should now be changed to high ground at a height of 1 to 1.5 meters. The high graft can not only effectively increase the resistance of the tree, but also promote the formation and early formation of grafted seedlings in the morning.

Post-grafting management should be promptly watered for lack of public opinion. If the daily average temperature of 10 °C ~ 15 °C prior to the spring equinox, because of the impact of low temperature wound healing, can be followed by a small plastic bags for warmth and promote healing. Diligently check the groundwork for the following germination. Set up rods or draperies to raise upright trunks against wind damage. When the new shoot grows to 50 to 60 cm in time, it is unfastened. Watch out for tips as you make new bends.

Automatic Massage Foot Bath Machine

The automatic massage foot bath machine is a device that uses water and massage rollers to provide a relaxing foot massage. It usually has a basin filled with water and has built-in massage rollers that move and massage the feet. The machine may also have other functions, such as heat therapy, air bubbles, and vibration. Users place their feet in the basin and the machine provides a soothing massage that helps relieve tension and improve foot circulation. Some automatic foot massage machines also come with removable attachments for additional massage options.

Automatic Massage Foot Bath Machine,Foot Spa Massageer,Heated Foot Spa,Foot Bath Massage Basin

Huaian Mimir Electric Appliance Co., LTD , https://www.mimirfootbath.com