How to use vacuum packaging machine

1. Turn on the power and turn the power selection switch as needed, that is, the power indicator is on. The power selection switch points to the vacuum as a vacuum seal, and the vacuum is directed to the vacuum inflation seal.

2. Place the plastic bag containing the item in the vacuum chamber, and place the bag mouth neatly on the heat seal. 3. Press down on the cover and the pumping (vacuum) indicator on the control panel lights up. When the vacuum pump starts to pump, the cover is automatically sucked. The vacuum knob can adjust the degree of vacuum according to the packaging requirements. When adjusting, the scale is from low to high and the amplitude is small.

4. Bag the products that need vacuum packaging, then put the open end on the sealing strip and pay attention to keep the bag straight. If it is a small bag, you can pack multiple bags at the same time.

5. When the pumping reaches the set time (ie the required degree of vacuum), that is, the pumping is over, the pumping indicator is extinguished.

6. When the pumping is completed, the indicator light will be extinguished, and the heat seal indicator light will be on, that is, the sealing procedure will be entered. The heat sealing time and temperature adjustment knob are arranged on the panel to adapt to different thickness materials. When adjusting the time and temperature, the rotation amplitude should be Small, to prevent the heat seal temperature from suddenly increasing, burning the heat seal fitting accessories.

7. When the set heat sealing time is reached, the heat seal indicator light is extinguished, as the heat seal ends, that is, the vacuum chamber enters the atmosphere through the solenoid valve until the cover is automatically lifted, and the vacuum packaging process is completed, ready for the next packaging. cycle.