How should the blast drying oven be maintained and maintained?

The blast drying oven is used for industrial and mining enterprises, laboratories, scientific research units, etc. for drying and baking molten wax and sterilization equipment. The instruments and equipment used in the laboratory need regular maintenance and maintenance, and the blast drying oven How to maintain and maintain it?

In fact, the maintenance and maintenance of the blast drying oven is similar to that of the circulating water vacuum pump, the glass reactor, the rotary evaporator, etc. Here, the rotary evaporator manufacturer has carried out the maintenance and maintenance of the blast drying oven. The specific summary is summarized as follows:

1. It is the same as all the instruments and equipment used in the laboratory, that is, the grounding, the grounding wire of the power socket should be done according to the regulations, and all the power supply voltages should be consistent;

2. When the blast drying oven is to be repaired, turn off the power; when using the blast drying oven, the hand must not touch the electrical equipment in the space on the left side of the cabinet;

3. The setting of the power cord should be noted that it cannot be attached to metal objects, nor can it be placed in an environment where the temperature is too high or the humidity is too high, so as to avoid the occurrence of leakage due to aging of the rubber;

4. This point must be paid extra attention during use. When placing the contents of the box, it should not be too crowded, there is no room for air convection, which will easily lead to the timely discharge of humid air;

5. After each use of the blast drying oven, the power supply should be completely cut off, and the inside and outside of the box should be kept clean and tidy, and it should be checked regularly.

This article is provided by the rotary evaporator manufacturer Keda, if reprinted, please indicate the source.