The first move is to prevent the mixture from becoming too concentrated. Due to the high temperatures in summer, the heat hole in the vehicle expands, which increases the flow of gasoline, accelerates its evaporation, and eventually leads to over-concentration of the mixture. Therefore, a small amount of holes should be adjusted to adjust the position of the acceleration device and the throttle rocker arm, and the oil level should be appropriately reduced to reduce the oil supply and prevent the danger of driving due to the excessive concentration of the mixed gas.
The second move is to prevent air resistance. During the hot summer, the gasoline engine fuel system is prone to gas resistance due to temperature increase, resulting in insufficient oil supply or interruption of fuel supply. To prevent air resistance, use an asbestos mat to separate the petrol pump from the exhaust pipe, or use a damp cloth to cool the petrol pump.
The third stroke prevented gasoline and water from evaporating. At high temperatures, the evaporation of oil and water will increase. At this time, the owner is required to check at any time, pay attention to the fuel tank cover to be tight, but also pay attention to prevent oil leakage. For the water level of the water tank, the oil level and height of the crankcase, the height of the brake fluid in the brake master cylinder, and the density of the electrolyte and the height of the liquid in the battery must be checked frequently. Once you find something unusual or out of specification, add and adjust it in a timely manner.
The fourth move prevents engine overheating. In order to prevent the engine from overheating, during the maintenance, it should be noted that the fan belt should not be exposed to oil to prevent slippage. The belt should be kept as tight as possible. During long-distance driving, pay attention to timely rest, try to select a cool place, and open the hood for ventilation and heat dissipation. When the tire pressure increases due to heat, it should immediately stop cooling, otherwise there is a danger of puncture, with particular attention to the use of deflation and cold water to reduce the tire pressure and temperature.
The fifth move to prevent auto-ignition, self-explosion. The high temperature will greatly increase the failure rate of the car itself. When the temperature is high, the heat dissipation is slow, and the temperature of the automobile water tank often affects the normal power output of the engine due to the high temperature, and may even make the engine unable to work normally. High temperatures also cause some parts to expand and distort, lighter parts will accelerate the wear of the parts, and heavy parts will burn the parts. At the same time, long-term use of onboard electrical appliances and air conditioning systems can also lead to overheating of the vehicle's electrical system. If various electrical wires or resistor boxes are not properly maintained, overheating can even cause the vehicle to ignite spontaneously.
The sixth stroke prevented the lubricating oil from deteriorating. Lubricants are susceptible to heat thinning, poor oxidation resistance, perishable, and even cause failures such as burning tile shafts. Therefore, the crankcase and gear box should be replaced with summer lubricants, and the quantity of oil and oil quality should be checked frequently and replaced in a timely manner.
Seventh move to prevent excessive body exposure. Car paint is like the skin of a person. It must be bright and beautiful. Long-term exposure can cause discoloration and wrinkling. Ordinary beauty protection, such as car washing and waxing, although it has some effects, it is difficult to achieve long-term results. The most appropriate way is to park your car in a cool place while parking.
Non-sterile Medical Washed Abdominal Pad + Cotton Loop
Non-sterile Medical Washed Abdominal Pad + cotton loop
Structure and composition: It is made of 100% cotton gauze, cotton tape, X-ray or X-ray film after degreasing, bleaching, drying, processing, cutting, folding, sewing and washing.
Product performance: White, soft, non-toxic, odorless, non-fluorescent, no oil spots, no whiskers, no hair corners, no wrinkles or debris adhesion, and has good water absorption performance.
Model specifications: Non-sterile type, washed. The color is mainly white, supplemented by blue and green. Specifications are divided into 30 * 30CM-4 / 6/8/12, 45 * 45-4 / 6/8/12, 50 * 50-4 / 6/8/12, 30 * 40/40 * 45, etc. , with or without belt; with or without light, can be sewn based on different requirements.
Packing: 50 / 100PE bag, 5 layers double corrugated kraft paper box.
Scope of application: It is used for one-time use by medical institutions for surgery or protection.
Medical Lap Sponges,Surgical Abdominal Gauze,Medical Abdominal Swabs,Medical Pre-Washed Lap Sponges
Shaoxing Gangfeng Hospital Products Co.,Ltd. , https://www.gangfenggauze.com