Chinese medicine decocting packaging machine operation method:
The decocting machine is assembled with the pharmaceutical packaging machine to form a decocting packaging machine. The operation method of the decocting machine is as follows:
(1) Check the cleaning of internal dirt, foreign matter, etc., and drain the washing water. Close all valves.
(2) Put the medicine bag into the porous barrel, calculate the water addition amount according to the above fifth chapter, and add water to the pot to be larger than this calculation amount;
(3) Cover the lid, turn on the power, open the power switch on the control box, press the mode switch button, enter the time setting state, set the decocting time, this value is the boiling time after boiling, its size The choice is related to the nature of the pieces. In general, there are hard objects such as roots, stems, shells and bones in the pieces. Then press the mode switch button to make the display display for temperature.
(4) Press the running button, the Wuhuo indicator light is on, the temperature value on the display is constantly rising, which is normal; when the liquid in the boiling pot appears boiling, the display shows 100 °C. If there is any error, the adjustable control panel The temperature correction knob is displayed so that it displays 100, the Wuhuo indicator light is off, the smoldering indicator light is on, and the set time starts to be recorded. During the period, the simmering fire and the fire alarm indicator will alternately turn off, which is normal. (Note: The timing time starts from 100 °C. If the temperature display does not correct to 100 °C or above when boiling, it will not be remembered.)
(5) After the set time, the power of the heating plate is automatically cut off, the running indicator is off, and the decocting is finished.
(6) Open the lid, lift the porous barrel, use a special U-shaped insert to suspend the porous barrel on the barrel, control the liquid medicine, and press the medicine bag with the special pressure plate attached to extrude the residual medicine in the medicine residue. Juice, then, set the number of packages and the amount of packaging, turn the valve handle to fully open, then start the operation switch of the packaging machine, start packaging, generally * package with water in the pipe, this package can not.
(7) After the liquid medicine is packaged, immediately put in a certain amount of water. 9 If the prescription is repeated, continue to decoct the medicine, and the water is placed in the calculated amount, repeat the above steps).
(8) Cleaning: If it is no longer decocted, wash it with water and remove the scale and the like. Then press to open the purge valve to drain the water and clean it for later use.
Pharmaceutical Grade
Due to people's attention to their own health, Plant Extract medicines have natural sources and less side effects compared to chemical medicines, and plant extract medicines have also attracted attention.
Pharmaceutical grade plant extracts are for the purpose of curing diseases. The same plant extract product can be divided into medical grade and Health Care Grade according to different purposes. Pharmaceutical grade plant extracts contain a single active ingredient and have a high content of active ingredients. Health-care grade plant extracts require low active ingredient content and play a preventive and protective role. In the future pharmaceutical products, medicines derived from natural plant extracts will occupy a very important position.
Natural Plant Extract,Pure Plant Extracts,Herb Extract,Pharmaceutical Grade
Amazy Organic Biotech Co.,Ltd , https://www.amazyorganic.com