Introduction of the process flow of the three-in-one filling production line

Three-in-one filling production line introduction

The machine is a two-machine joint machine that combines a fully automatic equipotential filling machine with a fully automatic capping machine on the basis of a single machine with excellent technical quality. It will be fully automatic flip type rinsing machine and fully automatic all-rounder. The three-machine unit combined with the automatic capping machine makes the power between the devices consistent, the bottle is stable and consistent, the bottle is not squeezed in the middle, and it is not easy to pour the bottle, short path, failure rate Low, high efficiency, saving people's electricity, solving the shortcomings of transmission costs between equipments. It is suitable for the filling of liquids such as wine, juice, mineral water, soy sauce and vinegar without gas, especially suitable for containers. Compare the filling of higher liquid level.

Three-in-one filling production line process

The production process of the machine is as follows: the bottle is transported through the air duct to the three-in-one filling machine. The bottle holder is mounted on the rotary disk of the bottle washer, and the bottle holder clamps the bottle mouth and turns 180° along a guide rail, so that the bottle mouth enters the bottle washer downward. In a specific area of ​​the bottle washer, a special nozzle sprays the flushing water to rinse the inner wall of the bottle. After the bottle is rinsed and drained, the bottle is clamped and then turned over 180° along the guide rail to make the bottle mouth upward. The washed bottle is exported by the bottle washer and sent to the filling machine by the bottle wheel. The bottle entering the filling machine is held by the bottleneck plate and stuck in the bottle mouth, and is lowered and raised by the elevator mechanism under the action of the cam. The filling adopts the gravity filling method, and the bottle mouth rises to open the filling valve to complete the filling process.

After filling, the bottle mouth drops off the filling valve. The bottle enters the capping machine through the card bottleneck transition dial. The anti-rotation knife on the capping machine catches the bottle neck and keeps the bottle upright to prevent rotation. The capping head keeps revolving and self-rotating on the capping machine, and realizes the process of gripping, capping, capping and capping under the action of the cam, and completing the whole capping process. The finished bottle is transferred from the capping machine to the bottle delivery chain through the bottle puller, and the three-in-one bottle machine is transported by the conveyor chain. The whole machine equipment is closed, the height of the sealing window is higher than the high point of the equipment, and there is an appropriate passage at the inlet and outlet, and an exhaust vent is left at the bottom of the sealing window.