1. This machine is not suitable for metal containers and metal bottle caps and anodized aluminum spray paint caps. It is forbidden to press the heating button on the metal table surface, otherwise the machine will be damaged. If you encounter metal cap and electro-aluminum spray paint cap, you can first carry out aluminum foil. Seal and screw on the cap.
2. During the use of the machine, the operator should always pay attention to the temperature rise of the sensor head. If the hand feels hot and hot (about 80 °C), stop working. Wait for the sensor head to cool naturally or use the fan to align the sensor head to force rapid cooling. When the temperature of the sensor head is lowered to room temperature (about 25 ° C), the operation is started again to prevent the temperature of the sensor head from being too high and damaged.
3. This machine is equipped with automatic temperature overheat protection function. When the temperature inside the machine is overheated, the green “overheat indicator†lights up. At this time, the internal cooling should be standby or the green light should be off immediately.
4. Always check the color of the white plastic board in front of the sensor head. If it is found that the burnt color is serious, please unscrew the rib cover of the sensor head to check whether the induction coil has carbonized or peeled off the insulating paint. If this phenomenon occurs, it should be timely. Replace the sensor head or induction coil to avoid continued damage to the main unit.
5. When the area of ​​the induction aluminum foil is too large, press the sensor switch, the time display will immediately go to zero without induction or the red "over-current indicator" flashes with the alarm of "drop". Normal work can only be carried out after the distance between the seal and the sensor head. You can use items such as rubber sheets for baffles, and do not replace them with metal materials.
6. This machine uses single-phase three-wire power cord. To make the operator safe, be sure to use single-phase three-wire power socket. The workplace floor must be dry to maintain insulation.
7. The input power supply voltage is normal. If the input power supply voltage is lower than 160V, stop working and wait until the voltage is normal before working.
8. The material of the selected aluminum foil film must be the same as the material of the sealed container.
9. Before the power is turned on, the sensor head must be inserted into the induction air socket and the nut must be locked. Each machine is equipped with a random sensor head, and the machine and sensor head cannot be exchanged at will.
10, the machine is equipped with a fuse of 5A, can not be replaced by a fuse of more than 5A.
11. The machine should maintain a good ventilation environment during use and should not block the vents of the chassis.
12. There is high voltage in the machine, and the circuit board is charged. It is strictly forbidden to open the machine for maintenance, so as to avoid personal electric shock.
13. If the wire is bare before use, stop using the machine and use it after maintenance.
14. This equipment cannot be impacted, stressed or damp when transported, stored or used.
15. When the product is inspected and checked out, in the case of normal transportation and packaging, if the parts of the product are found to be inconsistent with the packing list, they should be promptly sent to the factory.
16. The operation should be clearly understood in advance. If the quality of the product is found, it should be explained to the factory within the prescribed time limit. The equipment is guaranteed for one year and is responsible for life-long maintenance.
Well, the above is all about the main points that should be paid attention to when handling the handheld aluminum foil sealing machine . After reading this article, is this more familiar with this device? I also hope that everyone will be more comfortable when they use this device after reading this article.
Air pollution is getting more and more serious. Sudden virus outbreaks can harm the human body in many ways. However, if you do not protect yourself in time, you will be the next victim. Therefore, it is urgent to protect your health. Protective masks, breathe freely, I will protect your health. Multi-layer protection, light and thin, breathable, skin-friendly material, fit without ears, three-dimensional protection, professional inspection. Multi-layer filter protection, safe purification, so that you can breathe at ease every time you breathe, and guard your health layer by layer. Non-woven fabric isolation layer, blocking harmful large particles, non-woven fabric filter layer, filtering large particles, skin-friendly non-woven fabric, soft, skin-friendly and non-sensitive, buy masks from my home. The meltblown cloth layer has high density and good filtering effect. The soft non-woven fabric is soft and comfortable, light and breathable, and can absorb dust, odor and droplets. The toilet noodles evenly compensate for the pores, allowing you to experience high breathability and breathe smoothly.
Professional N95 Folding Mask manufacturer is located in China, including N95 Folding Face Mask,N95 Protective Folding Mask,N95 Disposable Folding Mask, etc.
N95 Folding Mask,N95 Folding Face Mask,N95 Protective Folding Mask,N95 Disposable Folding Mask
KUTA TECHNOLOGY INDUSTRY CO.,LIMITED , https://www.kutasureblue.com