After any machine has been in use for a long time, it needs to be cleaned and maintained, especially for the food machinery industry. Ice machine is one of them. For cold drink entrepreneurs, ice machine is essential, then you know how to clean and maintain the ice machine? Here is a detailed introduction.
Ice machine cleaning instructions: ice machine cleaning steps (cycle: 1-2 months / time)
1. Clear the ice and water of the ice storage machine;
2. Remove the front panel;
3. Set the main switch to the ON position and the handle switch to the OFF position;
4. Remove the evaporator baffle;
5. Inject 200 grams (400 grams of MV50 into the ice machine) into the water tank, and place the twist switch in the cleaning position for 15 minutes. 6. Clean each evaporator with the brush and the cleaning solution in the water tank. ;
7. Put the switch in the OFF position, remove the drain plug in the water tank, wash the cleaning liquid in the water tank filled in the water tank, and put the drain plug back to the original place;
8. Repeat the cleaning of the water tank 2-3 times;
9. Place the button switch in the ice making position;
10. Reinstall the evaporator baffle;
11. Check the ice cubes produced next time, all the cleaning liquids have been washed out (not sour)
12. Inject hot water into the storage refrigerator, use ice cubes to melt, and clean the water storage tank drain line.
Ice machine cleaning precautions:
1. Clean the water system, evaporator and water tank with the ice machine cleaning agent, and often clean the ice cubes;
2, cleaning the water filter;
3. The storage refrigerator should be cleaned regularly, once a week, cleaned with detergent and water, and rinsed with hot water. Wipe the machine with a clean rag on the surface of the cabinet;
4, check the thickness of the ice, if necessary, adjust the ice size control sensor by adjusting the screw;
5. Regularly inspect and tighten all bolts and screws;
6. Check the water leakage and tighten the water pipe connection;
7. Use a small brush or a metal brush to clean the condenser. Do not use a wire brush. Cleaning should be carried out after the machine has stopped working; 8. Check and clean all water treatment units.
Ice machine maintenance method:
The ice machine cleans the surface of the condenser every two months, and poor condensation and heat dissipation may cause damage to the compressor components. When cleaning, use a vacuum cleaner, a small brush, etc. to clean the condensed surface oil dust. Do not use a sharp metal tool to clean it to avoid damaging the condenser. Keep it ventilated smoothly. The ice machine must unscrew the inlet hose head for two months to clean the inlet valve screen to prevent the sand mud impurities from clogging the water inlet, which causes the water intake to become smaller, resulting in no ice. Clean the ice mold and the water tank once a month for three months. Through the above introduction, I believe that everyone has already understood the cleaning and maintenance methods of ice making. Buy snowflake ice machine, laboratory snowflake ice machine to find Beijing Changliu Scientific Instrument Co., Ltd., purchase equipment free training technology, welcome to inquire.
Silicone Foam Dressing Bordered
Silicone Foam Dressing Bordered,Silicone Foam Dressing Edging,Silicone Foam Dressing Border,Silicone Foam Dressing Frame
Roosin Medical Co.,Ltd , https://www.roosinmedical.com