Stainless steel noodle machine 8 features

Stainless steel noodle machine 8 features

The stainless steel noodle machine divides the whole roll of stainless steel into various strips of required specifications and can rewind multiple strips into rolls.

1. The thickness of raw stainless steel strip is between 0.15-6.0MM, and the width of raw material is between 250-650MM. Because the slitters are non-standard products, many of the specifications are set according to customer requirements.

2. Unwinding machine: Different uncoilers can be designed according to the inner diameter of the raw material roll. There are manual expansion and contraction, hydraulic expansion and contraction, and pneumatic expansion and contraction. The diameter of the expansion and contraction cylinder is reduced before the raw material is loaded into the unwinding machine. After the raw material roll is placed in the expansion and contraction cylinder, the diameter of the expansion and contraction cylinder is increased, and the raw material roll is fixed. If hydraulic unwinding is used, equipped with hydraulic feeding trolley, it can automatically expand and contract and automatically feed.

3. Slitting main machine: The slitting main machine is composed of guiding device, upper and lower cutter shaft, fixed arch and activity arch, lifting mechanism, transmission mechanism, power mechanism and speed reduction mechanism. It can be adjusted according to the thickness and width of the board.

4, waste side machine: edge wire material winding machine, can cut the edge of the wire after the material, focus on winding up, save the stacking space, and ensure the continuity of the operation of the host. At the same time, it is designed with automatic left and right wire arrangement.

5. Tension station: The tension generating station can be divided into manual, hydraulic and pneumatic, etc. The function is to ensure that many strips after slitting are smoothly arranged into the winding machine, and the tension is generated for the winding machine to be neatly received.

6, winding machine: aka rewinding machine, coiler, etc., the corresponding uncoiler, the main role is to cut the many small strips, neatly and compactly into a number of small volumes. It is equipped with a lifting and lowering arm. There are a variety of ways to expand and contract, and at the same time, it can be equipped with a unloading trolley to automatically remove many small rolls on the winder. The seamless structure can be selected according to the needs, equipped with a pusher plate, and can also be designed as an automatic correcting mechanism for easy operation.

7. System control: electronic control system and hydraulic system, electric speed regulation can be slip positive and reverse speed regulation, frequency conversion speed regulation, also can be full DC Continental 590 system control, PLC programmable controller, touch screen display length, Speed ​​and output, etc.

8. The whole production line has the advantages of high precision, reasonable structure, convenient use and simple maintenance. It is divided into simple, semi-automatic and fully automatic structures.