Rice transplanter maintenance skills

A change: It is to replace engine, plug box, gear, drive shaft, planting arm, gear box oil and gear oil. According to the requirements specified in the operating instructions of the rice transplanter, the engine oil should be replaced after one or 50 hours of engine operation; after two working seasons or 100 hours of transplanting, the oil should be replaced; the gear unit of the rice transplanter should be replaced after three quarters or 150 hours of operation. .

Second washing: After every class of work, clean the dirt on the rice transplanter, and also clean the carburetor, sedimentation cup, and air filter of the engine.

Three checks: It is to check the engine, transplanter working mechanism, walking and operating mechanism. The main contents of the inspection engine are the amount of fuel, the amount of oil, and the condition of each connection fastening part; the main contents of the inspection transplanter work mechanism are the wear and deformation of the delivery mechanism, crank, swing bar, claw, and fork etc. , lubrication conditions and clearance size; Check the main components of the walking and operating mechanism is the clutch, drive wheel, steering clutch working conditions, the amount of oil in the gear box, V-belt tightness, drive sprocket box oil, a variety of control cable Wait.

Four adjustments: It is the adjustment of the engine, transplanting work mechanism, traveling mechanism and operating mechanism. The main contents of engine adjustment are the adjustment of spark plug clearance and adjustment of the carburetor idle speed; the main contents of the adjustment of the transplanter working mechanism are the plant spacing, the number of plants, the depth of transplanting, the gap between the pick and the planting fork, etc.; adjustment of the walking and operating mechanism. YES: The adjustment of the pull wire includes the insertion and retraction of the clutch handle pull wire, the safety pull wire, the hydraulic lift handle pull wire, the steering clutch pull wire, etc., and the sensitivity adjustment. If the clearance is too large or insensitive, adjust the adjustment nut. At the same time, drip a few drops of oil in these wire holes to reduce the friction of the wire and increase the sensitivity.

Five maintenance: transplanter work more than 100 hours, it is necessary to regular maintenance of transplanter; storage idle maintenance is also called after-season maintenance. The rice transplanter is often idle for a few months or even more than half a year after the end of a working season. Therefore, it is important to maintain the post-season maintenance and extend the service life of the rice transplanter.

Fire-fighting Equipment

Fire-Fighting Equipment,Wet Chemical Fire Extinguisher,Co2 Extinguisher,Home Fire Extinguisher

DONGGUAN TENYU TECH.INC , https://www.tenyutech.com